Top Tech Tutorials: How To Set Up A Wireless IP Camera Program

Wireless IP cameras are wonderful for surveillance purposes, specifically considering that you can set them up in discreet locations without having to tear down a wall for the wires to snake through. If you plan to set up a indoor IP cameras system, although, then this guide ought to help set down the basics on your side:

Connect Your Camera To A Wireless Router

The very first thing you need to do is to determine or assign an IP address to your wireless IP cameras. You can do this by plugging the camera into a power outlet and employing a LAN cable to connect your camera to one of the ports on a wireless router. Temporarily turn off your computer’s firewall for the subsequent steps.

Install the application that comes with the camera

The application should be in a disk or flash drive that comes with the security camera package. If there is none, note down the precise model quantity of the IP cameras you have and use the Net to uncover their respective installer applications. This application suite will show you the IP address of your camera as well as let you set up a username and password for remote access.

Set your camera’s IP address and security credentials

Run the application suite that came with your PTZ IP cameras. Find the boxes that will allow you to alter the IP address of the cameras. It should look something like 192.168..100Computer Technology Articles, 10…100 or something comparable. Alter the final 3 digits to a value other than 100 to 150 but not significantly less than 2 or far more than 254. Make certain this new IP address is not used by any other wireless stuff prior to noting it down. Now alter the username and password to ones that you see fit.

Connect your camera to the WiFi network

Make sure your IP video camera is still connected to your router by way of the LAN cable. Open a internet browser and enter the IP address of your camera. Enter the security credentials. Navigate the resulting screen until you uncover an option to allow wireless LAN. Allow it and pick the type of encryption that matches your camera’s encryption. Seek for this bit of data in the camera’s manual. Seek for the “share essential” option and allow it. Enter your password if prompted. Wait for the camera to reset. Unplug your camera from your router and re-type its IP address on your browser. you should be in a position to view the IP camera feed if every thing was accomplished properly.

Test Out The Region You Want To Monitor

One of the final issues you want to do is to secure your IP cameras in spot only to locate that their view is blocked or that their view is too restricted to be of practical use. This is why you need to mark out ‘choke points’ that your IP camera program will monitor. Temporarily attach your cameras to these choke points and inspect the resulting video to see if the coverage is to your liking. The wireless nature of your IP cam setup will make the entire process less complicated prior to bolting it down in spot.

Bare all these in mind and you should have a fair grasp on how to install your wireless IP cameras to form a solid surveillance system!

This was a guest article from Adeel Quereshi.

Adeel is the public relationship manager of Chinavasion: the leading wholesale and dropship company based in China. Chinavasion sells Indoor IP Cameras and PTZ IP Cameras from China.

Leave a Reply